Multimag Cyble

Mô tả

Multimag Cyble is a multi-jet cold water meter designed for potable water flow measurement. It is engineered to:
– Integrate Cyble technology for remote reading (AMR/IoT)
– Provide magnetic anti-tampering protection
– Deliver high durability and measurement accuracy for residential, commercial, and light industrial water supply applications
Technical Information:
– Diameter: DN15 – DN40
– Standards: ISO 4064, OIML R49
– Measuring principle: Velocity – multi-jet
– Accuracy class: Class B (R50)
– Maximum pressure: 16 bar
– Metering ratio (R): R=80 or R=100
– Maximum temperature: 30 – 50°C
– Materials: Brass body, wear-resistant plastic internal components
– Register: Brass register, IP68 rated, 360° rotatable; smart-ready register compatible with remote reading devices
– High tamper resistance, with magnetic immunity up to 5,000 Gauss
Technology & Key Features
– Multi-jet measuring design
+ Water flow is divided into multiple jets impacting the turbine, providing higher stability and accuracy compared to single-jet meters.
– Integrated Cyble standard Cyble technology supports remote reading (AMR) via:
+ Walk-by / fixed radio data collection
+ Wired M-Bus
+ Pulse output for SCADA/IoT integration
– Anti-tampering and durability
+ Magnetic tamper protection helps prevent meter manipulation.
+ Materials and design suitable for humid environments (IP68-rated dial, typically submersible).
Benefits:
– Easy remote reading and AMR/AMI integration via Cyble module
– Good accuracy over a wide flow range, especially at low flows
– Strong magnetic anti-tampering and secure register design
– The dial is clearly visible, rotates 360° for easy reading, and does not fog up due to moisture even in humid conditions.
– Less sensitive to water quality: the multi-jet design allows the meter to perform better than single-jet types when the water contains small amounts of impurities.
Disadvantages:
– Higher cost compared to meters without remote reading capability
– Requires Cyble module or compatible AMR system to fully utilize remote features
– Mainly used for clean water, not suitable for measuring hot water or wastewater
– Installation requirement: to achieve the highest accuracy (Class B), the meter must be installed horizontally. If installed vertically, the accuracy class will drop to class A
– Size: The brass meter body is relatively heavy and occupies more space compared to some newer composite plastic models

ApplicationsMeasures flow in residential and commercial applications.